Replacement of HDPE pipes for PE-X to transport industrial treated water.

The Challenge

A semiconductor chip manufacturer company located in Israel, needed to replace an 10” HDPE line that transported industrial waste water to an MBR treatment facility.

Pexgol Solution

Having seen Pexgol’s experience in other projects in Israel and around the world, the client decided to install a 1000 meter Pexgol 400 mm, class 10 pipe.
The client was able to install the entire system in only 20 days since the pipes were supplied in sections of up to 57 m. Furthermore, Pexgol pipes do not require expansion loops since the pipe is able to withstand contractions and elongations without deformation.
Using Pexgol pipes allowed a faster installation time, helping reduce the total cost of the project.
It minimized potential failure points. Also reducing the cost of connections along the line.
The installation was done on pipe-racks of 8.5 meter above ground. The connections were made using electrofusion welding and flanges. Additional fittings such as PE-X elbows and others were used.

Client

Chip Manufacturer
Israel | 2021

Working Conditions:

Design temperature: 50ºC
Pressure: 4 bar

Pexgol Pipes

Pexgol 400 mm (16”), class 10

Application:

Industrial treated water transportation

Length:

1000 m / 3281 ft

RELATED CASE STUDIES

Escriba su búsqueda y presione Enter para comenzar