Mineral Processing – Brine Transportation
Reduction of material build-up in brine and brine/acid lines
Estudo de Caso Nº
8
Cliente
|
Condições de Trabalho
Solução Pexgol
Aplicação
Comprimento
Categorias
The Challenge
As the brine water and acid solution was being transported by the initial HDPE pipeline, salts were sticking to the pipe walls, reducing the inner diameter. Due to the low ambient temperatures, deposits of calcium sulfate formed on the inner wall of the pipes and on the elbows.
The matter was critical since the problem forced complete halting of work at the plant as well as lot of maintenance and reduction of production capacity.
Pexgol Solution
SQM decided to replace its HDPE pipes and elbows with Pexgol’s. Due to the especially smooth internal surface of Pexgol’s pipes and elbows, the replacement of HDPE pipes with Pexgol eliminated the problem of chemical deposits. This resulted in fewer work interruptions and improved production capacity.
The production and transportation of Pexgol’s pipes in coils also reduces the number of joints and possibility of clogging. As a result, it reduced maintenance costs and brought the end of frequent forced halts in the work processes at the plant.
The original mean time between failures (MTBF) of the HDPE pipes was one month. Since changing to Pexgol in 2010, no sign of failure has been detected.
Vertical Drain in Underground Mine
|
Overcoming Geotechnical Challenges with Pexgol at Media Luna
|
Open Cast Mine Dewatering
|
Potable Water Aqueduct
|