Abrasive Tailings Transport
Installation of Pexgol Pipe for the Transport of Abrasive Tailings.
Estudo de Caso Nº
83
Cliente
|
Condições de Trabalho
Solução Pexgol
Aplicação
Comprimento
Categorias
The Challenge
Pirquitas Mine, located in the north of the Argentine territory, required the transportation of abrasive slurry composed of quartz, iron, tin, zinc and lead minerals in a 2 meter section. The old rubber coated steel pipe that was intended for that line had failed due to excess of abrasion.
The use of coated steel or plastic pipe was evaluated.
Pexgol Solution
The client finally decided to install a Pexgol pipe due to its low roughness index and strength against the abrasion presented by the fluid to be transported.
Pexgol is currently has been working 6 times more than the rubber lined steel pipe would have been. Both options were similar in cost.
For the installation, no special tools were needed as the joints were flanged. Only two joins were made.
Overcoming Installation Hurdles and Enhancing Operational Efficiency
|
Transport of Compressed Air for Underground Mine
|
Implementation of Pexgol Pipelines for the Transport of Muddy Water
|
Vertical Drain in Underground Mine
|