Skip to content

Water and Sulfide Transportation

Water transportation with sulfide and cobalt particles

Estudo de Caso Nº

22

Cliente

Moa Nickel S.A. Sherritt
Cuba

|

2015

Condições de Trabalho

110°C – 1 bar.

Solução Pexgol

Pexgol 250 mm Class 12.

Aplicação

Water transportation.

Comprimento

40 m.

Categorias

Water and Sulfide Transportation

The Challenge

Moa Nickel transported water with nickel sulfide particles, this liquid formed a paste that was incrusted on the pipe walls and elbows, reducing it inside diameter. In order to repair the issue, they needed to stop the production plant, which required long maintenance time and as a consequence it decreased their productive capabilities.

Pexgol Solution

The former stainless steel pipe was replaced for a Pexgol pipe 250 mm, class 12. Even though the pipe had low thickness, it didn’t have problems such as wear nor incrustations. Likewise, due to its low roughness coefficient is lower than the titanium pipes, the head losses decreased and the pipe managed to work in a lower pressure with a greater flow.

Since the installation, the client didn’t spend on maintenance.

Estudos de Caso Relacionados

High-pressure water transport for the Southern Pit in a copper and zinc mine.

High-pressure fluid transport

Minera Antapaccay
Peru

 | 

2023
Drainage in Underground Mine with Slopes Between 40° and 90°.

Water Drainage in Underground Mine

NEMISA Mine
Mexico

 | 

2018
Dewatering tThrough Shafts for an Underground Lead-Zinc Mine.

Dewatering Through Shafts

Esan Eczacibasi Endustriyel Hammaddeler
Turkey

 | 

2019
Hot sylvinite leach at 114°C/237°F

Mineral Processing – Potash Processing Plant

ICL group, Dead Sea Works
Israel

 | 

1987
Installation of Pexgol pipes for the transport of formation water (gas and minerals)

Gas Wells: Formation Water Treatment

Canacol
Colombia

 | 

2018
Water Drainage in Harsh Ground

Water Drainage at an Open-Cast Mine

Timmins Gold Corp Group, Molimentales del Noroeste Mine
Mexico

 | 

2016