Slurry Transportation
Replacement of a HDPE Pipe for a Pexgol Pipe
Estudo de Caso Nº
40
Cliente
|
Condições de Trabalho
Solução Pexgol
Aplicação
Comprimento
Categorias
The Challenge
The client required to replace their current HDPE pipe lines where they transported slurry since they have frequent wear and leak issues on the joints. They used thermo-fusion welding, plus reinforcement with a Vitaulic 995 coupler. This sort of situation involved a considerable expense every time they failed, but they didn’t last long. The failures were every 3 to 4 months.
Pexgol Solution
In order to perform a better job when transporting slurry, the client decided to install a Pexgol pipe of 1642 meters SDR 15 225 x 20.4.
Thanks to Pexgol’s comprehensive piping solution, abrasion issues were avoided, since its cross-linked material is between 4 to 10 times more resistant than other pipes materials.
The pipes were supplied n sections up to 240 meters each one, consequently the installation was simple improving the process’s security and therefore protecting the environment.
Open Cast Mine Dewatering
|
Pexgol’s Solution for CFE: A Leap in Durability and Efficiency
|
Optimization of Potable Water Supply for 1,600 residents
|
Vertical Drain in Underground Mine
|